If you don’t see it on the list, just ask!
GUNSMITHING PRICES ARE CASH, ADD 3% FOR CREDIT CARD . These are estimated prices effective March 1, 2023
All Gunsmithing services are available. Please email Bill ([email protected]) prior to dropping off. Please include a description and pictures of any work that you’d like done if possible. Current lead time for simple work such as PC9 thread removal is approximately 3 weeks. More complex machine work is 6 weeks minimum. Complete rifle builds, complex machine work, restoration or repairs that require parts from outside vendors, are averaging at least 12 weeks. Repairs that require outsourced parts can be longer due to disruptions in the supply chain.
Thank you for your patience and understanding
Basic Gunsmithing charges
| Minimum bench charge, long guns |
$95.00 |
| Minimum bench charge, handguns |
$105.00 |
| Handgun complete disassembly and reassembly |
$106.00 MIN |
| Long gun complete disassembly and reassembly |
$100.00 MIN |
| Labor, per hour |
$150.00 |
| |
|
Drill and Tap
| Drill and tap, per hole, starting at (Mil Sup holes start @ $95/each plus tooling) |
$65.00 through MIN, $95 blind MIN |
CLEANING
| Basic cleaning, field strip, STARTING AT |
$105.00 |
| Detail clean, PLUS disassembly costs, STARTING AT |
$135.00 |
CHECK HEADSPACE
| Headspace GO/NOGO for common cartridges, most guns |
$65.00 |
| Headspace .001″ increment for 308Win/5.56/223, most guns |
$75.00 |
| Headspace for odd, obsolete cartridge, starting at |
$89.00 |
MAJOR REPAIR WORK
| Basic screw removal, minimum |
$75.00+ |
| Remove sheared screw, minimum |
$130.00+ |
| Removed sheared screw via helical milling, minimum |
$175.00+ |
| Remove sheared shotgun magazine tube that is threaded in place, minimum |
$200.00+ |
| EDM drill and/or EDM sinker removal of seized pins, screws and taper pins, STARTING AT |
$400.00+ |
| Removal of items stuck in bore, minimum |
$150.00 |
| Removal of live round, CALL FIRST, minimum |
$350.00 |
Bolt action rifle work
Bolt fluting: Remington 700 Long or Short Action, helical or straight, 6 flutes- $135. Cerakote bolt Graphite Black after fluting- $45, other colors $55. Coat firing pin shroud additional $25.
| Thread muzzle for non-directional brake, recommended muzzle device supplied at time of install |
$150.00 |
| Thread muzzle and provide custom made thread protector |
$185.00 |
| Time and install muzzle brake, most brakes, starting at |
$175.00 |
| Thread 700 bolt for oversized knob (customer supplied knob) |
$85.00 |
| Thread and chamber barrel for Rem 700, Winchester 70 push feed, or Howa 1500 (customer supplied premium barrel)- LA cartridges $30 extra |
$425.00 |
| Thread and chamber barrel fror Tikka T3/ T3X, turn down shank- LA cartridges $30 extra |
$450.00 |
| Thread and chamber barrel for Savage 10/110, headspace off shoulder, removes barrel nut system and allows heavier contour barrels to be used for great accuracy (customer supplied premium barrel)- LA cartridges $30 extra |
$425.00 |
| USMC spec lug slot for M40A3/A5 Optical mounting platform will milled rear bridge |
$235.00 |
| Convert Rem 700 to 8-40 screw |
$155.00 |
| Supply and install side bolt release on Rem 700 |
$135.00 |
| True (blueprint) M700 action- includes chasing receiver threads, true receiver lug abatements, true bolt lugs and bolt face- does not include timing bolt handle if needed |
$195.00 |
| Bed MAGPUL Hunter 700 stock |
$145.00 |
| Bed HS Precision stock |
$195.00 |
| Bed McMillan or Manners stock with aluminum pillars and Marine-tex |
$295.00 |
| Cut and crown barrel with M40A3/A5 style crown |
$125.00 |
| Vais muzzle brake supplied and installed |
$295.00+ |
| Timney trigger installed if gun apart |
$50.00 |
| |
|
| Mount optic: Install rings and bases, boresight optic, starting at |
$75.00 |
| Disassemble or assemble bolt rifle before or after machine work, starting at |
$50.00 |
| Rebarrel rifle other than Rem 700 |
Call or email |
| Build spec M40A3 on customer supplied parts |
Call or email |
| Build spec M40A5 on customer supplied parts |
Call or email |
| Build complete custom rifle with customer supplied parts |
Call or email |
Shotgun work
| Install customer supplied Wilson Combat/Scattergun Tech ghost ring sights on bead barrel shotgun |
$105.00 |
| Install customer supplied Wilson Combat/Scattergun Tech ghost ring sights on rifle sight shotgun barrel; requires removal of front sight |
$135.00 |
| Install customer supplied Vang Comp Ghost ring sights, include silver soldering front base in place, requires refinishing |
$250.00 |
| Machine ports on Remington 870 barrel |
$150.00 |
| Remove factory Remington rifle sight base, price per base |
$65.00 |
| Machine barrel to accept Rem Choke tubes, PLUS COST OF CHOKE TUBE (REQUIRED), BARREL MUST NOT BE CHROME LINED Thin-wall chokes additional charge, TAC13, additional charge |
$135.00 |
| Open fixed choke |
$95.00 |
| Cut and crown plain shotgun barrel |
$75.00 |
| Cut and crown vent rib shotgun barrel, starting at |
$85.00 |
| Drill and tap to install shotgun bead, starting at |
$55.00 |
Remington 870 Express Performance Packages
|
870 Express Basic- Cut and crown vent rib barrel to ~18.5”, drill, tap and install fiber optic bead, install bar stock extractor, install oversized safety
|
$250.00 |
| 870 Express Intermediate- Cut and crown vent rib barrel to ~18.5”, drill, tap and install fiber optic bead, install bar stock extractor, install oversized safety, and machine for interchangeable choke tubes |
$295.00 |
| 870 Express Advanced- Cut and crown vent rib barrel to ~18.5”, drill, tap and install fiber optic bead, install bar stock extractor, install oversized safety, and machine for interchangeable choke tubes, machine out magazine dimples, supply and install 2-shot magazine extension |
$355.00 |
Browning Citori Reliability Package
| Citori reliability package, clean internals and install Chrome Silicon Top Lever Spring, 2 Chrome Silicon Hammer Springs, 1 Bottom Barrel Firing Pin Return Spring, 1 Bottom Barrel Firing Pin, 1 Top Barrel Firing Pin and test fire. $355 |
AR180 Magazine conversion
Convert customer supplied AR-15/M16 magazines to work with Armalite AR180. For machine work only, $45/magazine for 4 or less magazines, $30/magazine for 5 or more, $25/magazine for 11 or more. Add $50 plus return shipping to test fit magazines to your rifle. Recommend customer sends good quality magazines, magazines with weak welds will not withstand pressure of vise when machined.
1911 pistol work
| French border slide |
$175.00-225+ |
| Flat top slide |
$95.00-200+ |
| Machine golf ball or chainlink pattern and flat top slide |
$175.00-250+ |
| Carry cuts on Commander or full sized pistol slide |
$125.00-200+ |
| Ball end mill cuts on commander or full sized gun |
$175 |
| Heavy machine chamfer bottom of slide |
$150.00-175 |
| Machine dovetail for customer supplied front sight |
$100.00 |
| Drill slide for 1/16″ roll pin for Novak style front sights |
$45.00 |
| Machine slide for Novak style front and rear sights |
$195.00 |
| Machine slide, supply and install Novak Lo Mount style 3 dot tritium front and rear sights, starting at: |
CALL |
| Machine slide, supply and install Heine Slant Pro front and rear sights, black, starting at: |
CALL |
| Machine slide, supply and install Heine tritium front and rear sights, starting at: |
CALL |
| Lower ejection port |
$150.00 |
| Fit slide to oversized frame |
$225.00 |
| Undercut trigger guard |
$100.00 |
| Golf ball front strap |
$325.00+ |
| Chainlink front strap |
$325.00+ |
| Install new plunger tube |
$70.00 |
| Dehorn pistol |
$150.00 |
| Furnish, install and contour premium grip safety |
$295.00 |
| Blend rear of slide and frame |
$50.00 |
| Fit and blend customer supplied MSH |
$105.00 |
| Fit and blend customer supplied MSH, texture with golf ball or chainlink pattern |
$170.00 |
